After the installation of PVC floor, in order to obtain better use effect and prolong service life, we need to maintain the PVC floor in stages, which can be roughly divided into the following three steps:
Stage 1: After the PVC floor is laid, it can be cleaned and maintained before use. Tools can be used: ground grinder, red grinding disc, paraffin absorber, paraffin tractor, paraffin compressor, and strong general cleaning agent, high strength wax.
1. Clean up the dust and sundries on the surface of PVC floor;
2. 干净的地板上,3 m红色磨板在低速或类似产品(稀释强的地板一般与水和添加地板清洁剂清洁1:20),删除保护蜡、油脂、灰尘和其他在地板表面污垢,下水道污水和吸水机;
2. On clean floors, 3 m red grinding board is used for low-speed or similar products (diluted floors are generally cleaned with water and floor cleaner added at 1:20). Protective wax, grease, dust and other dirt on the floor surface, sewage and water absorbers are removed.
3. Wash with clean water and suck dry.
4. According to the needs of the ground, the surface wax of 1-2 layers can be strong.
Stage 2: Daily cleaning and maintenance, using tools: dust mop and dust remover, floor cleaning and polishing agent
1. Pushing dust or vacuum cleaner - dragging dust-proof agent on the ground and pushing dust after drying;
2. Wet mop - Dilute it with water at 1:20 and mop it with semi-wet mop. If necessary, low-speed machine can also be used to clean the ground.
The third stage: regular cleaning and maintenance, the tools available are: dust mill, red and white abrasive water absorber, wax-towing extruder and floor cleaner, high-strength surface polishing wax.
1. Dust or vacuum cleaner;
2. After the ground cleaning agent is diluted by 1:20 water, mop the ground or clean it with a high-speed polishing machine and a red abrasive disc.