Shandong plastic floor and Shandong flax floor belong to the same elastic floor, but what is the difference between them? Listen to Xiaobian:
成分和生产工艺：亚麻地板是由氧化亚麻籽油，软木塞和木粉的混合物制成的，层压在黄麻背衬上。 塑料地板是以聚氯乙烯及其共聚树脂为主要原料制成的，通过涂覆工艺或压延和挤出，在片材的连续基材上添加填料，增塑剂，稳定剂，着色剂和其他辅助材料。 或通过挤压工艺生产。 从这个角度来看，亚麻是由纯天然亚麻制成的，而塑料地板是由聚氯乙烯制成的，但它也是一种绿色材料。
Composition and production process: Flax flooring is made of a mixture of oxidized flaxseed oil, cork and wood flour, laminated on the jute backing. Plastic flooring is made of polyvinyl chloride and its copolymer resin as the main raw materials. Through coating process or calendering and extrusion, fillers, plasticizers, stabilizers, colorants and other auxiliary materials are added to the continuous substrate of sheets. Or through extrusion process production. From this point of view, flax is made of pure natural flax, while plastic floor is made of polyvinyl chloride, but it is also a green material.
耐磨性和稳定性存在差异：山东亚麻地板通常耐刮擦，亚麻地板又硬又软，这就是为什么厚亚麻地板与塑料地板相比在评分性能上不是很好的原因。 更好的耐磨性。 另外，亚麻地板的尺寸稳定性是一般的。 因此，必须使用牢固的胶水。 总体而言，亚麻地板的稳定性不如塑料地板。
There are differences in wear resistance and stability: Shandong flax flooring is usually scratchproof, and flax flooring is hard and soft, which is why thick flax flooring is not very good in scoring performance compared with plastic flooring. Better wear resistance. In addition, the dimensional stability of flax floor is general. Therefore, strong glue must be used. Generally speaking, the stability of linen flooring is not as good as that of plastic flooring.
维护困难：亚麻地板需要在自然光下固化，样品和物体会变黄，黄色，亚麻地板对维护产品的抵抗力较低（PH> 7），亚麻地板需要翻新，必须打特殊护理产品 打蜡时使用。 亚麻地板比塑料地板坚硬得多，但是由于表面是多孔的，因此必须迅速清除所有污渍，否则表面会留下难以清除的印记，必须重新打蜡和上蜡。 由于它不是热塑性材料，因此无法回收利用，并且燃烧后的痕迹很容易磨损，但是对于更深的热痕迹，透明塑料地板比亚麻地板更容易抛光。
Maintenance difficulties: Flax floors need to be cured under natural light, samples and objects will turn yellow, yellow, flax floors have low resistance to maintenance products (PH > 7), flax floors need to be renovated, and must be used when waxing special care products. Flax flooring is much harder than plastic flooring, but because the surface is porous, all stains must be removed quickly, otherwise the surface will leave imprints that are difficult to remove, and wax and wax must be re-waxed. Because it is not a thermoplastic material, it can not be recycled and burnt traces are easy to wear, but for deeper thermal traces, transparent plastic floor is easier to polish than flax floor.
安装难度不同：亚麻地板很难安装。 如果室内温度太低，亚麻地板会破裂。 由于其吸收特性和尺寸不稳定性，必须使用超级胶水快速安装产品。 例如，一个安装团队可以铺设80至100平方米的塑料地板，或者只能铺设60平方米的亚麻地板。 亚麻籽油对温度不敏感。 不能用相同的材??料焊接。 因此，它不是焊接而是“接缝”。 因此，亚麻地板不能分为E3防水，亚麻地板不适合在潮湿的房间或干净的房间使用。 必填区域。 亚麻地板散发出强烈的气味，并留在已安装的房间中。
Installation difficulty is different: flax flooring is difficult to install. If the indoor temperature is too low, the flax floor will crack. Because of its absorption characteristics and dimensional instability, it is necessary to use super glue to quickly install products. For example, an installation team can lay 80 to 100 square meters of plastic floor, or only 60 square meters of flax floor. Flaxseed oil is not sensitive to temperature. It is not possible to weld with the same material. Therefore, it is not welding but "seam". Therefore, flax floor can not be divided into E3 waterproof, flax floor is not suitable for wet rooms or clean rooms. Required area. Flax floors emit a strong odor and remain in installed rooms.