1，塑料地板避免浸泡水，清洁剂，水和胶水很容易发生反应，导致地板表面脱胶或抬起，因此不宜多用水，尤其是热水拖曳。 当出现墨水，汤，油等污渍时，可用稀肥皂水擦拭。 如果不清洁，可以用少量汽油轻轻擦拭，直到去除污渍。
1. The plastic floor should not be soaked with water, detergent, water and glue, which are easy to react, leading to the degumming or lifting of the floor surface, so it is not suitable to use more water, especially hot water for dragging. When ink, soup, oil and other stains appear, they can be wiped with thin soapy water. If not, wipe lightly with a small amount of gasoline until the stain is removed.
2.如果是PVC水管，则可以自行购买PVC水管。 首先将折断的管道切开，然后将接口插入管道的一端，以便将另一端切掉。 它与接口中的另一个齐平，以便可以将其拉直，然后直接将其发送到此端，以便两端都有一定的十字，然后除去距离，然后在直接端上涂上PVC胶 。 两个落水管的内部和外部。
2. If it is PVC water pipe, you can buy PVC water pipe by yourself. First cut the broken pipe, then insert the connector into one end of the pipe to cut off the other end. It is flush with the other one in the interface so that it can be straightened, then sent directly to this end so that there is a certain cross at both ends, then the distance is removed, and then PVC glue is applied to the direct end. Inside and outside of two downpipes.
3. If there is scratch on the multi-layer composite plastic floor, the best way is to cut off the scratch part and replace it with a new material; or the scratch part can be treated by inlay.
4. The PVC floor of the same quality has scratches, which can be polished by sanding machine, and then the waxing water is as bright as new!
5. The PVC plastic floor sales company said that it can buy waterproof tape to repair the water pipe, entangle it, and then apply mortar waterproof agent and cement on the pipeline. If you can't handle it yourself, you'd better find a professional company.