塑料地板行业信息：塑料地板的防水层失效，首先的原因可能是由于塑料地板基层的含水量高，所以在施工前必须先确认基础是否完全干燥，否则水蒸气会包裹在里面 ，防水后，影响防水底漆的渗透，然后在阳光下，水蒸气会转化为蒸汽。 这些蒸气可能导致塑料地板防水层剥落。
Plastic floor industry information: the first reason for the failure of the waterproof layer of plastic floor may be the high water content of the plastic floor base, so before construction, it is necessary to confirm whether the foundation is completely dry, or the water vapor will be wrapped in it, after waterproof, it will affect the penetration of waterproof primer, and then under the sun, the water vapor will be converted into steam. These vapours can cause the plastic floor waterproofing to peel off.
塑料地板地面基层没有清洁度，并可能导致防水故障。 在应用防水底漆之前，塑料地板的底面必须清洁，并且不得有灰尘或松散的材料。 防水层和基础层可能未牢固粘合。
Plastic floor floor base is not clean and may cause water-proof failure. Before applying the waterproof primer, the underside of the plastic floor must be clean and free from dust or loose material. The waterproof layer and foundation layer may not be firmly bonded.
塑料地板防水底漆太薄，影响防水效果。 防水底漆材料必须达到一定的厚度才能起到防水作用，特别是在基础强度和平坦度不够的地方，有必要重复几次防水底漆，直到水泥基础的孔被完全密封 并达到一定水平 强度，否则会导致防水层剥落，由于防水膜层的破损而导致渗漏和起泡。
The waterproof primer of plastic floor is too thin, which affects the waterproof effect. The waterproof primer material must reach a certain thickness to play a waterproof role, especially in the place where the foundation strength and flatness are not enough, it is necessary to repeat the waterproof primer several times, until the holes of the cement foundation are completely sealed and reach a certain level of strength, otherwise, the waterproof layer will be peeled off, and leakage and foaming will be caused due to the damage of the waterproof film.
引入家用塑料地板的同时还带有绿色塑料地板。 普通的工业塑料地板在制造过程中会被胶合，只要使用胶水，就会涉及甲醛。 新安装的塑料地板将在早期释放出一定浓度的甲醛。 这种塑料地板在稳定之前可以在工厂和公共场所使用一段时间。 这样的塑料地板显然是不可能的。 对于家庭。 然而，随着热传递过程的到来，塑料地板不再能够被胶合，而是通过热压缩过程直接粘合，从而只要没有胶水，塑料地板的甲醛含量就最小，例如 最终成为地板它可以舒适地用于家庭客厅，卧室，厨房，包括医院，食品工厂和其他场合。
The green plastic floor is also introduced into the household plastic floor. Ordinary industrial plastic floor will be glued in the manufacturing process. As long as glue is used, formaldehyde will be involved. The newly installed plastic floor will release a certain concentration of formaldehyde in the early stage. This kind of plastic floor can be used in factories and public places for a period of time before it is stable. Such a plastic floor is obviously impossible. For families. However, with the arrival of the heat transfer process, the plastic floor can no longer be glued, but directly glued through the heat compression process, so as long as there is no glue, the formaldehyde content of the plastic floor will be the smallest, for example, the final floor can be used comfortably in the family living room, bedroom, kitchen, including hospitals, food factories and other occasions.
随着家用塑料地板和环保塑料地板概念的融合，塑料地板使用率越来越高。 如果您需要安装家用塑料地板，则特定塑料地板的价格低廉，您可以向我们详细咨询。 与木地板相比，家用塑料地板既便宜又便宜。 如果需要，可以详细咨询我们。
With the integration of household plastic floor and environmental protection plastic floor, the utilization rate of plastic floor is higher and higher. If you need to install household plastic floor, the price of specific plastic floor is low, you can consult us in detail. Compared with wood floor, plastic floor is cheap and cheap. If necessary, you can consult us in detail.