Waxing - brighten PVC resilient floor oil
Why PVC plastic floor wax? Wax can not only prevent skidding and reduce natural skidding, but also increase the glossiness and beauty of the floor, and more importantly, it is more convenient after cleaning. Jinxiang, one of China's top ten plastic floor brands, shares the correct steps of PVC plastic floor wax.
1. First pull the wetland surface with wax water, soak it for a few minutes, especially for the dirty place, polish it with cloth (it can be repeated several times).
2. Then use clean water for 2-3 times, and the wax oil water must be clean.
3. Blow dry thoroughly.
4. Then wax.
Basic waxing procedure:
1. Use wax water to remove the above dirt. If the ground has been used for more than one year or is dirty, add half of the water (the ground is very dirty, which can be grinded with a red cotton pad by a grinder). After decontamination, mop the floor with clear water until it is clean, and wait for the floor to be completely dry.
2. For the first layer of waxing, use a clean white mop or cloth to evenly wipe the wax water on the floor, for example, the wax water is dry (the wax water does not touch hands), and then use a grinder to polish the white polishing cotton.
3. Apply a second layer of wax as above. No pedestrians are allowed to pass within two hours after completion.